Motorcycle 5-3/4 5.75 LED Headlight for Harley Davidson 883,sportster,triple,low rider,wide glide Headlamp Projector Driving Light

  • Fits most of round 5-3/4" LED Headlight, eg: Harley Davidson speed triple, street triple (round headlight model), rocket iii 3 roadster,thunderbird;harley davidson dyna,low rider,wide glide,sportster,super glide,super low,roadster,nightster,night train,night rob special,sreet bob,forty eight,iron 883,seventy two,cvo breakout,cvo softail convertible,blackline,cross bones,XR1200X,rockersoftail,springer,street 500,street 750,victory octane,indian scout,triumph,Honda shadow VT750DC...
  • DOT,SAE,E-Mark approved, legal on the road, waterproof ip65, shockproof, dustproof
  • Super bright light pattern over standard incandescent lamps,cut through the night. Voltage:DC 12-30V,6000K color temperature
  • Valid irradiation distance is much more longer than normal bulb,plug n' play,easy installation with manual. Connector: H4 (NOTICE: 2014+ Harley Davidson Touring and Trike models needs the adapter:ASIN B018HSCD1K)
  • NOTE: Add the bucket ASIN: B0751BXX9B if it doesn't fit into your bucket; Forty Eight XL1200X (2010-later) and Dyna models(06-later,except FXDL,FXDLS and FXDWG); FXDF models require separate purchase of mounting block(P/N 67741-06); The following models require vibration damper(P/N 67700059).

As far as I can tell, this is the same headlight HD sells for over $200 clams. My buddy came over and he has a HD model daylight headlight, we took it apart and could not tell a difference between this one and the OEM model. This one took 10 minutes to install, looks nice and tosses out a lot of lumens. Basically plug and play. Save some serious green.

So, I honestly figured I would try this before spending a lot more. I put it on an 04 Dyna Low Rider. First off, I had heard that people had to kind of make adjustments to get it into the stock light fixture, that was not the case here, I had to make zero modifications and it plugged in and fit perfectly with no movement. I used it a few days later in the dark and it was actually pretty amazing how much better it lit up than the stock light. It it literally 3 to 4 times brighter and even puts out like a line that extends about 30 feet to the left and right of the bike. Once I clicked it to the bright, it was like i was in an actual large truck, thats how much light it emitted. So far I am 100% please. As for the durability, it has only been a few days, but honestly if I had to replace it every year, I would still be totally fine with it. Great light and the black looks really cool.

I can't say enough about this light. Given the price, I expected some corners to be cut. The product is well made, solid construction from the lens, to the heat exchanger to the wiring. It was plug and play. Huge improvement over the stock halogen. I installed it last night on my vrod and it looks fantastic.

I bought these headlight bulbs for a pair of 2018 Indian Scouts. The original H4 headlights did not light up much. When I went looking for an LED replacement the bulbs that fit "out of the box" were $150 and up. I read the reviews on this bulb and decided to give it a try. As delivered the bulb does not fit the Indian headlight rim as others pointed out. But after a little filing on the bulb it fit petfectly in the Indian headlight rim. I used a utility knife to trim the plastic film on the bulb and left the film on while I filed the the edge of the lens on the bulb ao avoid scratching the lens. Once the bulb was in the headlight rim and back in the bike i peeled the film. The bulb lights up a dark roadway much better than the stock bulb. It definitely had a different look than the stock bulb. One thing many of the reviewers mention was that the directions that come with the bulb don't say which way is up on the bulb. I mounted the bulbs with the writing at the top. After dark I turned the lighl on with it shining on the garage door and cycled the light switch. Writing at the top is the correct orientation. Time will tell if it lasts but so far I love it. It's bright, wasn't too difficult to fit and install and it did not break the bank. I would definitely recommend this bulb for anyone looking to save some money that isn't afraid to do a little filing.

0:00 0:00 This video is not intended for all audiences. What date were you born? JanuaryFebruaryMarchAprilMayJuneJulyAugustSeptemberOctoberNovemberDecember12345678910111213141516171819202122232425262728293031201920182017201620152014201320122011201020092008200720062005200420032002200120001999199819971996199519941993199219911990198919881987198619851984198319821981198019791978197719761975197419731972197119701969196819671966196519641963196219611960195919581957195619551954195319521951195019491948194719461945194419431942194119401939193819371936193519341933193219311930192919281927192619251924192319221921192019191918191719161915191419131912191119101909190819071906190519041903190219011900 Submit Adobe Flash Player is required to watch this video. Install Flash Player Riders, this headlight is awesome. It looks and works great! As mentioned in my short video, be careful removing and replacing the retaining clips on the inside of the headlight bezel ring. There is a lot of tension on them and they will go flying if you try to just pry them out. Use needle nose pliers and get a firm grip on them. There is a video on youtube that shows how to remove and replace them. They are the most difficult part of changing out the light. Also, my bike had two plugs once I removed the headlight. Remove the smaller light bulb & put a some electric tape over the end of plug to make it water tight and tuck it in behind the new light. You won't need it for the new headlight. I can't stress the importance of thinking safety when removing and installing the retaining clips. Wear eye protection.

Just installed 2 of these on my 2013 Triumph Thunderbird storm. It's a major improvement over stock.

Wow what a light! Had a bit of a time getting it to fit but once it settled in its been fine. Way brighter than the 9004 replacement LED bulb I had. Nice and white too. Roadsigns pop even during the day.

I looked at numerous Daymaker Led lights for my Dyna low rider and because of the reviews picked this one. Mind you, HD wanted $300 for a similar light. My niece and I watched a YouTube video on the installation and we had the light installed within 15 min. Super easy to install and it's functional and looks great. I highly recommend this product!

I had just installed a pair of LED auxiliary driving lights on the engine guard of my 2013 H-D XL1200CAV and took it out for a ride. Pulling up behind a pick up truck at an intersection, I could clearly see the newly installed driving lights, but was surprised to see that my headlight was not lit. In fact, it WAS lit, it just didn't show up. I even pulled off the road and checked. So, since I like three points of light on the front of my motorcycles, I bought this replacement headlight. Install was a little fussy, due to the stock retainer ring, but it was literally a plug-to-plug replacement. However, that's where the comparison ends. this thing is BRIGHT! Before replacement, low beam on the H4 bulb was washed out by sunlight. Now low beam IS sunlight. As the bike rolls down the road, there are three distinctly bright, very noticeable lights to catch the attention of any cadger. Blows the "Gee, officer I didn't see him!" excuse right out of the water!

WOW! WOW! WOW! I have 140k miles on my 2003 Harley Dyna and have tried so many different daystar, sivlerstar, halogen bulbs it's ridiculous. The HD LED headlights are 3 -4 times the price of this which is why I never purchased them. THis headlight fit perfect in my 5 3/4 inch headlight housing. It was literally disconnect old light, connect new light, tighten bezel, and ride. SUPER easy, exact replacement. This headlight is FREAKING BRIGHT! AMAZINGLY bright! There is a definite difference between low and high beam (not accurately portrayed in pic) but the high beam throws a vertical wall of light way down the road. I would giv

  • Fits most of round 5-3/4" LED Headlight, eg: Harley Davidson speed triple, street triple (round headlight model), rocket iii 3 roadster,thunderbird;harley davidson dyna,low rider,wide glide,sportster,super glide,super low,roadster,nightster,night train,night rob special,sreet bob,forty eight,iron 883,seventy two,cvo breakout,cvo softail convertible,blackline,cross bones,XR1200X,rockersoftail,springer,street 500,street 750,victory octane,indian scout,triumph,Honda shadow VT750DC...
  • DOT,SAE,E-Mark approved, legal on the road, waterproof ip65, shockproof, dustproof
  • Super bright light pattern over standard incandescent lamps,cut through the night. Voltage:DC 12-30V,6000K color temperature
  • Valid irradiation distance is much more longer than normal bulb,plug n' play,easy installation with manual. Connector: H4 (NOTICE: 2014+ Harley Davidson Touring and Trike models needs the adapter:ASIN B018HSCD1K)
  • NOTE: Add the bucket ASIN: B0751BXX9B if it doesn't fit into your bucket; Forty Eight XL1200X (2010-later) and Dyna models(06-later,except FXDL,FXDLS and FXDWG); FXDF models require separate purchase of mounting block(P/N 67741-06); The following models require vibration damper(P/N 67700059).

As far as I can tell, this is the same headlight HD sells for over $200 clams. My buddy came over and he has a HD model daylight headlight, we took it apart and could not tell a difference between this one and the OEM model. This one took 10 minutes to install, looks nice and tosses out a lot of lumens. Basically plug and play. Save some serious green.

So, I honestly figured I would try this before spending a lot more. I put it on an 04 Dyna Low Rider. First off, I had heard that people had to kind of make adjustments to get it into the stock light fixture, that was not the case here, I had to make zero modifications and it plugged in and fit perfectly with no movement. I used it a few days later in the dark and it was actually pretty amazing how much better it lit up than the stock light. It it literally 3 to 4 times brighter and even puts out like a line that extends about 30 feet to the left and right of the bike. Once I clicked it to the bright, it was like i was in an actual large truck, thats how much light it emitted. So far I am 100% please. As for the durability, it has only been a few days, but honestly if I had to replace it every year, I would still be totally fine with it. Great light and the black looks really cool.

I can't say enough about this light. Given the price, I expected some corners to be cut. The product is well made, solid construction from the lens, to the heat exchanger to the wiring. It was plug and play. Huge improvement over the stock halogen. I installed it last night on my vrod and it looks fantastic.

I bought these headlight bulbs for a pair of 2018 Indian Scouts. The original H4 headlights did not light up much. When I went looking for an LED replacement the bulbs that fit "out of the box" were $150 and up. I read the reviews on this bulb and decided to give it a try. As delivered the bulb does not fit the Indian headlight rim as others pointed out. But after a little filing on the bulb it fit petfectly in the Indian headlight rim. I used a utility knife to trim the plastic film on the bulb and left the film on while I filed the the edge of the lens on the bulb ao avoid scratching the lens. Once the bulb was in the headlight rim and back in the bike i peeled the film. The bulb lights up a dark roadway much better than the stock bulb. It definitely had a different look than the stock bulb. One thing many of the reviewers mention was that the directions that come with the bulb don't say which way is up on the bulb. I mounted the bulbs with the writing at the top. After dark I turned the lighl on with it shining on the garage door and cycled the light switch. Writing at the top is the correct orientation. Time will tell if it lasts but so far I love it. It's bright, wasn't too difficult to fit and install and it did not break the bank. I would definitely recommend this bulb for anyone looking to save some money that isn't afraid to do a little filing.

0:00 0:00 This video is not intended for all audiences. What date were you born? JanuaryFebruaryMarchAprilMayJuneJulyAugustSeptemberOctoberNovemberDecember12345678910111213141516171819202122232425262728293031201920182017201620152014201320122011201020092008200720062005200420032002200120001999199819971996199519941993199219911990198919881987198619851984198319821981198019791978197719761975197419731972197119701969196819671966196519641963196219611960195919581957195619551954195319521951195019491948194719461945194419431942194119401939193819371936193519341933193219311930192919281927192619251924192319221921192019191918191719161915191419131912191119101909190819071906190519041903190219011900 Submit Adobe Flash Player is required to watch this video. Install Flash Player Riders, this headlight is awesome. It looks and works great! As mentioned in my short video, be careful removing and replacing the retaining clips on the inside of the headlight bezel ring. There is a lot of tension on them and they will go flying if you try to just pry them out. Use needle nose pliers and get a firm grip on them. There is a video on youtube that shows how to remove and replace them. They are the most difficult part of changing out the light. Also, my bike had two plugs once I removed the headlight. Remove the smaller light bulb & put a some electric tape over the end of plug to make it water tight and tuck it in behind the new light. You won't need it for the new headlight. I can't stress the importance of thinking safety when removing and installing the retaining clips. Wear eye protection.

Just installed 2 of these on my 2013 Triumph Thunderbird storm. It's a major improvement over stock.

Wow what a light! Had a bit of a time getting it to fit but once it settled in its been fine. Way brighter than the 9004 replacement LED bulb I had. Nice and white too. Roadsigns pop even during the day.

I looked at numerous Daymaker Led lights for my Dyna low rider and because of the reviews picked this one. Mind you, HD wanted $300 for a similar light. My niece and I watched a YouTube video on the installation and we had the light installed within 15 min. Super easy to install and it's functional and looks great. I highly recommend this product!

I had just installed a pair of LED auxiliary driving lights on the engine guard of my 2013 H-D XL1200CAV and took it out for a ride. Pulling up behind a pick up truck at an intersection, I could clearly see the newly installed driving lights, but was surprised to see that my headlight was not lit. In fact, it WAS lit, it just didn't show up. I even pulled off the road and checked. So, since I like three points of light on the front of my motorcycles, I bought this replacement headlight. Install was a little fussy, due to the stock retainer ring, but it was literally a plug-to-plug replacement. However, that's where the comparison ends. this thing is BRIGHT! Before replacement, low beam on the H4 bulb was washed out by sunlight. Now low beam IS sunlight. As the bike rolls down the road, there are three distinctly bright, very noticeable lights to catch the attention of any cadger. Blows the "Gee, officer I didn't see him!" excuse right out of the water!

WOW! WOW! WOW! I have 140k miles on my 2003 Harley Dyna and have tried so many different daystar, sivlerstar, halogen bulbs it's ridiculous. The HD LED headlights are 3 -4 times the price of this which is why I never purchased them. THis headlight fit perfect in my 5 3/4 inch headlight housing. It was literally disconnect old light, connect new light, tighten bezel, and ride. SUPER easy, exact replacement. This headlight is FREAKING BRIGHT! AMAZINGLY bright! There is a definite difference between low and high beam (not accurately portrayed in pic) but the high beam throws a vertical wall of light way down the road. I would give it a conservative estimate of 3x the distance of the same watt halogen bulb. If ever a product was appropriately named, the DAYMAKER headlight is that product. Because of the vertical oval of light thrown in the high beam, it was extremely easy and quick to adjust the headlight exactly where I wanted it for max throw. I wish I had a dual headlight setup so I could have TWO of these things! I have not been this impressed with a product in a while. I ran Sylvania Silverstar, Phillips Xtreme Vision and this LED shames every bulb I've tried. When you look at the pics, just understand that they DO NOT do the amount of light this headlight produces any justice at all. BUY THIS HEADLIGHT NOW!

e it a conservative estimate of 3x the distance of the same watt halogen bulb. If ever a product was appropriately named, the DAYMAKER headlight is that product. Because of the vertical oval of light thrown in the high beam, it was extremely easy and quick to adjust the headlight exactly where I wanted it for max throw. I wish I had a dual headlight setup so I could have TWO of these things! I have not been this impressed with a product in a while. I ran Sylvania Silverstar, Phillips Xtreme Vision and this LED shames every bulb I've tried. When you look at the pics, just understand that they DO NOT do the amount of light this headlight produces any justice at all. BUY THIS HEADLIGHT NOW!

Comments

Popular posts from this blog

ZINGYOU Condenser Microphone Bundle, BM-800 Mic Kit with Adjustable Mic Suspension Scissor Arm, Shock Mount and Double-layer Pop Filter for Studio Recording & Brocasting (BM-800 Microphone Bundle)

China races preventing a bad outbreak of Covid-19